Diligence

The male dignity has been concerned about the stronger gender since ancient times.Strengthening this is a found artificial member that, according to historians, is at least 28,000 years old.It was discovered during archaeological excavations in Germany - a country that considered the porn industry as a pioneer and a leader.

Today, it is possible to change the size of the penis in various methods - from the use of special drugs, the use of ointments and creams, a stretching massage is performed until surgical surgery.However, genital nozzles, which can be purchased in games, for intimacy and with their own hands, become popular.

Is it possible for the member to be a nozzle?

The Internet is full of requests that "make an artificial rooster with your own hands".The increased interest is simply explained: the models presented in the stores are of high quality and expensive, and the low -priced ones are not different.If you want to try a sex game, a dilemma is born: do you need to pay for goods if there is no confidence in further use?

After all, it turns out that the girl does not approve the presence of the nozzle or causes discomfort, irritation or pain (the latter is not excluded for men).If you choose a more affordable option, there is a risk of irritation that the genitals are played or damaged by the broken or peeling parts of the nozzle or the injury of the genitals.

It is also possible if you want to try "here and now", but there is no time to wait for the internet and there is no way to visit the nearest sex shop.In such situations, the question is how to make a vibrator or member nozzle at home is very relevant.

If you take into account the product, it becomes clear that it is quite difficult to build, but not impossible.The most important thing is to long and have some time and to buy the necessary materials.The latter depends on the final quality of the obtained object.The advantage of home members is that its shape and size are limited to the author's imagination.

To choose the right material

Use for nozzles and artificial members produced under industrial conditions:

• Cybercro is a substance that is almost similar to human genuine skin.It is soft, delicate, virtually not distinguished from the living body because it quickly grabs the temperature when touching the body and keeps it all the time to stay the organ.The disadvantage of the material is very sensitive to injuries and requires careful treatment, washing in warm soap water and storing a special case.
• Polivinyl chloride is a substance that is most popular for producing vibrators and sex toys.Advantages: The ability to quickly take the form of the human body, strength and combination of lubricants.Wash with PVC with soft cleaning products: soap, shower gel or intimate hygiene, does not require special storage conditions.The application is possible with any frequency and intensity.
• Silicone is a medical substance used to produce intimate goods in 90% of cases.Soft, flexible and quite elastic.It is able to quickly take the body shape and, after "work" to return to its original state.Advantage: Hypoallergenicity that allows all toys to function with any intensity.Store the nozzles from the silicone in a dark place because it is killed by ultraviolet rays.The disadvantage - along with the toys, processes the lubrication and is exclusively water -based.
• The rubber is a special type of material with increased heat softened properties and comfortable touch.It is suitable for creating products that need to be administered and maintained.The softness of the material allows them to become more comfortable for both partners and elasticity - the necessary parameters (length, thickness, ribs, acne, etc.).Nozzles of rubber members do not rub or cause allergic reactions.They use non -aggressive detergents or special cleaning agents for intimate toys.
• Plastic is a dense material in which special mixtures are added for greater softness and elasticity.It is used to produce special shape nozzles.

Material selection is the most important phase of the vibrator's manufacture with its own hands, as the definitive version of the product and the safety of both partners depend on it.Therefore, in this case, it is extremely undesirable savings.

Type

Before you make Phallus at home, you need to clarify which of these materials is available to the manufacturer.Some are available for free in construction stores, others when ordering over the Internet.

So they are appropriate to produce a home gravity:

• alginate formatting mass;
• silicone casting mass;
• Bending polyurethane mass.

Other options may be offered in the store, but before you get it, you need to know that the substance causes allergic reactions and how safe the body is.

Stages of work

How to make a vibrator at home?Will be required:

• Flexible transparent plastic;
• adhesive tape (adhesive tape);
• selected material;
• Food film.

A square or rectangle is cut out of the plastic plate - depending on the size of the product.The length of the disk is willing - the more centimeters you want to add to yourself, the longer.The width of the sheet depends on the existing parameters of the penis: it must be easily entered and free space.In order for a homemade member to fit into size, it must be as follows:

• Measure with a centimeter tape;
• Add the right amount of centimeters to the results;
• Cut the desired width.

Error: Rolling the plastic plate around the penis and cutting it off with "eyes" - the self -made such village will be small or too large.

When the dimensions and cuts are completed, the plate is turned with a tube, the edges of the edges are tightly secured with a ribbon.A circle is cut out of the plastic that closes one hole and is tightly packed with tape.The task is to make the received tube completely tight.

The second stage of the "How to Make Vibrator" process.To do this, a erectile penis is tightly wrapped in the adhesive film to exclude the relationship between the weight and the body.If the task is to make a smooth nozzle, you need to carefully pack, except for all possible irregularities, as the smooth of the interior of the future nozzle depends on it.

The casting mass is then poured into the prepared tube and the penis is lowered there.The solidification process lasts for an average of 15 minutes and the structure is removed from the penis.Now you can carefully remove the tape and release the product from the plastic frame - a home pastus is ready for use.

If the guy wants to give the game an anatomical form, this can be done using knife and abrasive materials.It is easy to prepare "chipsi" chipsi, ribs, antennas and other nozzles.

Risks

Before you make a member with your own hands with improvised materials, you need to take into account the serious health risks in your home -sex games:

• Seals, sharp or poorly processed edges, corners, protrusions and other home game are able to provoke injuries to the genitals of both partners;
• Incorrectly calculated size threatens the loss of the nozzle in the intimacy process;A more serious opportunity - you can get stuck into a woman's body;
• If the calculations have been performed in deficient erection or lost at the time of the mass consolidation, there is a risk that the nozzle will not work without medical care;
• Violation of the tightness by packing a member in a film can cause masses in the urethra, which triggers the inflammatory or obstruction of the urethra;
• Keeping members for 15 minutes is a difficult task for men to take drugs with phosphodesterrase inhibitors, which have severe side effects for internal organs.

After evaluating and consideration of all possible risks, they are suitable for independently producing vibrators and nozzles responsibly and carefully, and each stage is carefully and accurately performed.

What to make an artificial Fallus

It is easier to make a wallimitator directly at home, that is, an artificial member.Such games are more advantageous for the ladies, and if she wants, she is free to leave.Suitable for producing dumplings:

Plaster mixture

It is freely sold in a construction supermarket, pharmacy or children's play.Once the mass is prepared (the rules of work with the plaster work are described in the package), the desired member can be eliminated and dries completely.After processing the abrasive paper to eliminate all the bumps.A condom is placed on the village before the love games.

The use of plastic plaster mixtures is also possible to produce nozzles: for this, the film is covered with a completely built and wrapped in a film with plaster mixture and let it harden.However, such a game will be very stiff, and this property will cause discomfort, pain, and discomfort.The second disadvantage is fragility.

Silicone mixture

Another option is to fill it with the previous vibrator.That is, once the game has been purchased (or the packaging is accidentally received from friends), the silicone mass can be poured into a plastic form, which can previously be lubricated with vegetable oil at the end of the work and glued the parties after stabbing with super adhesive.

The adhesive is able to provoke the strongest allergies, so games with such artificial members are only recommended with 2 rubber products.

Wax

This material is available in 90% of cases and everywhere while it has benefits:

• Easily takes over the desired shape;
• It has a characteristic aroma;
• In the absence of a beekeeping blowing allergy, it is allowed to introduce a woman into the body without a condom (it is sufficient to treat fat).

The wax candle warms up, receives the size of long and width required, if necessary, additional stimulating ledges, spikes, ribs, etc.

Plasticine

This product for children's creativity can be used as well as wax, but it is worth considering that it is material and so you can easily lose shape in the midst of sexual intercourse.A simple pencil is able to make a more stable game located in a blurred artificial member or pre -frozen the village.

Means of need

You can make a nozzle for a penis, but this process is not fast.If the desire for experiments has suddenly arose and there are no special toys, you can use improvised tools.How to replace a member?

• Vegetables and fruits.Almost every refrigerator contains gifts of nature that have a phallic symbol.Ideal and affordable options - cucumbers and bananas that bring their enthusiasm for intimate toys in chilled form.
• Mobile phones.We are talking about small models that can be made to vibrate.
• Electric razor.The cutting block is previously removed from it.

The alternative serves as a comb, with long and wide feathers, with curls and other phallic shapes, without sharp corners and protrusions.The main condition for their application is to rinse in the water and take care of it.

They call the toys in bed that call diversity and acuteity into the couple's daily intimate lives with nozzles, artificial members and lubricants.However, before changing a member with an artificial copy, it is worth coordinating this question with a lover, otherwise a romantic evening may end sadly: a serious quarrel or a painful break.